Chesapeake Auto Repair

If someone told you there was a fairly inexpensive way to improve your vehicle's handling, fuel economy and extend the life of your tires, you'd probably ask, "What do I have to do?" The answer is to rotate your tires.  But you have to do it regularly.

A lot of drivers think skipping tire rotation is a way to save money.  But when you don't rotate your tires, they will almost certainly wear unevenly.  That's because when your tires touch the surface of the road, the friction and traction causes miniscule parts of the rubber to come off.  And that process isn't exactly the same on each corner of your vehicle.  Some vehicles have the drive wheels in the front, some in the rear and some on all wheels.

Rotating your tires at regular intervals minimizes the differences in the way the tires wear.  The amount and pattern will be spread out equally if your tires spend time at all different positions.  The more even the wear, the more consistent traction, handling and braking will be.  All four tires will last longer this way, and when it is time to replace your tires, they'll all be worn out the same so you can replace all four with the same model tire.

Some people who choose not to rotate their tires find that one or two will wear much faster than the others, and often they'll replace just the worn ones.  While you can find similar tires, they won't all be the same and will certainly not have the same amount of wear. 

There are different tire rotation patterns depending on several factors: front-wheel drive, rear-wheel drive, all-wheel drive, directional tires/wheels, different sized wheels/tires on front and rear axles.  Also keep in mind that when your tires are new, some tire manufacturers require you to rotate them or else they won't honor the warranty. 

Your manufacturer recommends intervals for tire rotation, so it's best to follow their suggestion.  Your vehicle service facility can advise you when you need to get your tires rotated.  And many facilities include free tire rotation for as long as they're on your vehicle if you buy your tires at their shop.

West Service Center
904 Cavalier Blvd
Chesapeake, Virginia 23323
757-487-4420
http://westservicecenter.com

There's nothing that radiates cool like a vehicle radiator that's helping to keep your engine running at the proper temperature.  You don't have to baby it, but you can't simply ignore it, either. 

Let's take a quick dive under the hood to let you know what the radiator is doing.  It takes the heat your engine produces and moves that heat outside.  It's not an easy job and heat is an engine's number one enemy.  Now that you're thinking how nice you want to be to your radiator, we have a couple of ideas how you can take care of it.

The easiest thing is to pay attention to your vehicle's temperature gauge. If it gets in the "too hot" or "not hot enough" range, have it checked out soon.  Make sure your coolant is kept at the correct level and if you see a trend that you have to add coolant more than a couple of times a year, you might have a leak.

Even if there are no obvious problems, every couple of years or so, consider taking your vehicle in for radiator maintenance.  A technician can run a pressure check for leaks and ensure that the thermostat and radiator cap are working correctly.  The technician will check that fans are running like they should so they can move air over the radiator and heat away from the coolant inside.

Ask your service advisor when you should have your radiator flushed and coolant replaced according to the manufacturer's recommended intervals.  In addition to cooling, coolant has corrosion inhibitors which stop working after a while.  Without those corrosion inhibitors, the inside of your radiator can literally start rotting away.  Keep in mind that the coolant level must be kept at manufacturer's specifications since if those corrosion-preventing chemicals aren't touching the metal, they're not preventing corrosion. 

Different vehicles use different coolants, so your service facility will make sure yours is getting the correct one.  Keep your coolant system happy and one day, maybe you can order up a custom license plate, "RAY-D-8."

West Service Center
904 Cavalier Blvd
Chesapeake, Virginia 23323
757-487-4420
http://westservicecenter.com

Your vehicle has lots of doors including that one usually near the back on the vehicle's side.  That's the fuel door, something you use every time you gas up.  These endure hundreds of open-and-close cycles, usually without any problems.  But when they act up, it can be a major inconvenience for you.

When they stick in the "open" position, it can present real dilemma.  You can still pump your gas, but do you just drive around with that flap sticking out the side? What happens if someone steals the gas cap or it gets damaged? What happens if it rains? Yep, it's decision time.

A fuel door that sticks open can be due to a number of factors.  The hinge on the door may have broken, possibly from corrosion or it may have been hit sometime.  Some vehicles have a cable that operates the door and it could be loose.  The latch that holds the door shut could have broken or it, too, could be bent from something hitting it. 

You probably want to take care of this sometime soon since your gas cap is wide open and unprotected when the door doesn't shut.  Plus, it's possible that the door could be torn off completely.  Often a stuck open fuel door can be fixed fairly inexpensively and quickly depending on the type of mechanism your vehicle has. Looks like it's an open and shut case.

West Service Center
904 Cavalier Blvd
Chesapeake, Virginia 23323
757-487-4420
http://westservicecenter.com

Automatic transmissions rule. The old days of shifting your own gears are a thing of the past for most drivers.  But automatic transmission trouble can be a big inconvenience for any driver if it comes at the wrong time in the wrong place.  Here are some signs to look out for that may mean you are having transmission issues.

When you are driving, your vehicle seems to slip in an out of gear without you touching anything.  That's what some call, not surprisingly, a "slipping transmission." 

When your vehicle shifts from one gear to the next, you hear a loud "clunk." Transmissions are supposed to be nearly silent when they shift, so that noise is telling you something is wrong. 

If you notice there's a puddle of some fluid under your vehicle, your transmission could be leaking fluid.  Try to figure out what color it is (try putting a piece of cardboard underneath to capture some of the fluid).  If it is red or brown, that's a sign it could be transmission fluid. Sometimes you may smell the transmission fluid, too; it has what some consider a "sweet" odor.

You may have a warning light that goes on when your transmission fluid is low (it could be a special transmission symbol or simply the Check Engine light).  That light could also mean the fluid is too hot or has low pressure.

If you shift your vehicle into D (for Drive) and it doesn't move or slowly engages after some delay, you may be seeing the start of a serious problem.

Of course, you don't want a malfunctioning transmission to strand you at some inopportune time. So if your vehicle is showing any of these signs, arrange a time for a technician to check it out.  Not only are broken transmissions an inconvenience, they can be a safety hazard, too. 

West Service Center
904 Cavalier Blvd
Chesapeake, Virginia 23323
757-487-4420
http://westservicecenter.com

The other day, a driver was trying to open his vehicle's hood so he could add some windshield washer fluid.  But when he pulled the hood release inside the car, nothing happened. 

Usually, opening any hood is a 2-step process.  You pull the hood release (which is usually a handle under the dashboard to the left of the steering column) and listen for the hood to pop up slightly. (It doesn't open all the way because it has a safety latch to prevent you from accidentally opening it up while you're driving.) Then, you get out and find the latch, usually through the grille near the hood.  There's a little handle on it which you push, slide or pull (there are a few different types) at which point the hood can be opened up all the way. 

But in this driver's case, the hood would not release at all when he pulled the handle inside.  Not knowing what to do, he called his service advisor, who told him to bring it over.  The reason? A hood with a broken latch could be a safety hazard since it is possible it's not securely closed. And in this condition, it's possible for the hood to suddenly release while you are driving, obscuring your view of the road. 

Latch issues can be caused by many things, perhaps a broken cable between the hood release and the latch.  It's possible that cable just detached or frayed after being opened so many times.  If a hood release cable isn't kept lubricated, it can corrode and just lock up.

In this driver's case, the cable had corroded and broken, so it had to be replaced.  Unfortunately, many times you won't know you have a problem with your hood latch until one time you pull it and it breaks without warning.  When your vehicle is in for routine maintenance like an oil change, a technician will often keep an eye out for signs that your hood latch needs attention so you don't get "locked" out of your engine compartment.

West Service Center
904 Cavalier Blvd
Chesapeake, Virginia 23323
757-487-4420
http://westservicecenter.com

If you keep up on technology trends, then you may be intrigued about synthetic motor oil.  It was introduced in the 1960s when Mobil came up with it.  Mobil's oil was different from conventional motor oil because it was first broken down to its basic molecules.  Then, Mobil removed additional impurities from crude oil and "tailored them to the demands of modern engines."

Synthetic oil is becoming more popular now because of its advantages over conventional oil. It's more resistant to sludge forming in an engine.  It is more efficient and protects engines better under temperature extremes.  Because it allows drivers to go longer between oil changes, many feel it's more convenient. 

The downside is that synthetic oil is more expensive, but because it doesn't need changing as often, the cost can be pretty comparable in the long run.

Those who drive high performance vehicles (think Audi, BMW, Mercedes) are already using synthetic oil if they're following their manufacturer's guidelines.  Other manufacturers recommend a synthetic blend.  So for those who are using conventional oil, you may want to consult your service advisor for some recommendations if you want to switch to synthetic. 

If you're the type who always waits until the last-minute or doesn't ever get in quite in time for the recommended oil change interval, the longer gap required between changes with synthetic oil may appeal to you.  In some cases, you can go up to 15,000 miles/24,000 km between changes. 

If you drive in a very cold climate, synthetic oil can flow more easily at startup and may offer quicker engine protection.  On the other hand, in hot climates, synthetic oil can resist heat breakdown better.

Or you may be one of those drivers who have been getting along fine with conventional oil changes.  Millions do.  Just remember that changing your oil is considered the most important maintenance you can do on your vehicle, so make sure it's done at the right time and with the oil that best suits your driving needs.

West Service Center
904 Cavalier Blvd
Chesapeake, Virginia 23323
757-487-4420
http://westservicecenter.com

If your vehicle makes a grinding sound when you turn the steering wheel, it's speaking to you.  No, really, it is.  So listen to what it's saying and you could avoid a much more costly repair down the road.

A grinding sound coming from the front of your vehicle when you are turning can offer some very informative clues as to what's going on.  One cause could be that there's a problem with the mechanical linkage that enables you to turn the wheels.  Another is that the hydraulic system that makes turning the steering wheel easier may have its own problems. 

Think of it.  Hydraulic power steering has many components that need to work in tandem.  The power steering fluid may be too old and contaminated.  Or its level may be low. That may be caused by a leak somewhere in the system. A technician can check things over to find out exactly what's happening.

Other causes of grinding while turning can be problems with the suspension in the front.  You may have a failing CV (constant velocity) joint.  It could be your brakes are partially engaging while you are turning.  That metal-on-metal sound is never a sign that things are working just the way they're supposed to.

To a technician looking to pinpoint the problem with your vehicle, it's not a daily grind at all.  Experience and training will help her or him zero in on what's causing the noise and get you back on the road. Maybe you can enjoy your sound system more after that distracting background noise has disappeared!

West Service Center
904 Cavalier Blvd
Chesapeake, Virginia 23323
757-487-4420
http://westservicecenter.com

Race car drivers have demonstrated the advantages of disc brakes, so most modern vehicles use them.  Sometimes just the front wheels have disc brakes, but many vehicles now have them all the way around. 

A major component of the disc brake is called a caliper.  It works by squeezing brake pads against the disc or rotor, kind of like a bicycle hand brake.  The brake pads themselves are what contact the rotor, causing friction to build and the wheel to slow down, but it's the calipers that apply the pressure to the pads.

Caliper design has evolved over the years, and there are two common types.  One is called a floating caliper.  It has one or two pistons on one side of the disc. When you push down the brake pedal, the piston or pistons in your caliper put pressure on that one side.  A mechanism connected on the other side of the disc applies pressure as well, squeezing your disc so the vehicle stops.  Floating calipers are less expensive since they have fewer parts.

The other type is called a fixed caliper.  They use pistons on both sides of the disc, sometimes several.  They are often used in more high-performance or heavy-duty vehicles.

Calipers can have rubber seals to keep out dirt, debris and moisture, but when that rubber wears out, sometimes the calipers can get contaminated.  They can stick or start leaking; they can even rust.  Then your caliper can get stuck applying that "squeeze" when you are not pressing on the brake pedal.  Or they can get stuck in the other position, not applying stopping power when you press the pedal.

When this happens, it's not unusual to feel your vehicle pull to one side when you brake.  You might notice a burning smell from the constant friction if the caliper is stuck on, plus you may feel the heat from the wheel after you park and get out of your vehicle.  Sometimes you'll hear a high-pitched sound or clunk if your calipers are binding up. 

That's your cue to have them checked out at your vehicle service center.  If your calipers aren't working correctly, it can be a safety hazard.  Sticking calipers can affect your ability to steer and stop; this is the kind of "brake time" you need so you can get them back on track and working properly.

West Service Center
904 Cavalier Blvd
Chesapeake, Virginia 23323
757-487-4420
http://westservicecenter.com

There are some dashboard lights you should pay more attention to than others.  One is the air bag light.  If it's on and your vehicle is in an accident, your air bags probably won't do their job.

Automakers began installing air bags in the late 1990's since they were mandatory in the United States, and manufacturers have included them in Canadian vehicles as well.  Safety experts say using a seat belt in combination with an air bag gives passengers the best chance of surviving a crash and minimizing serious injury.

The air bag warning light takes a few different forms.  Some look like a picture of a belted passenger with an inflated air bag from a side view.  Or there may be a warning light that says something like "Air Bag," "SRS" (for supplemental restraint system), "Airbag Deactivated" or "Air Bag Off."

Different things cause the air bag light to come on.  Your vehicle may have been in an accident during which, while the air bags didn't inflate, crash sensors were activated.  Some of them may be connected with your vehicle's seat belts.  A technician can reset the air bag if this has happened.

Fuses can also blow which will cause the air bag light to come on.  Another possible cause? A sensor that tells the vehicle's computer whether or not there is someone riding in the passenger front seat may be malfunctioning. 

Air bags are not for the do-it-yourselfer.  They are sophisticated systems that require specialized training and equipment to diagnose and repair.  If an air bag light is on, take it to a qualified service repair facility.  One more thing: remember that safety experts have designed air bags to work in conjunction with seat belts for maximum protection in accidents.  So always wear your seat belt.  

West Service Center
904 Cavalier Blvd
Chesapeake, Virginia 23323
757-487-4420
http://westservicecenter.com

Your vehicle is like you in a way.  When it gets hot, it needs to be cooled down.  And one of the key parts to keeping it cool is the water pump.

Now, that's a bit of a misnomer.  It IS a pump, but it's pumping coolant, not pure water.  Cooling off your engine is vital since it builds up heat when it creates power by burning fuel.  Your water pump acts as a way to recirculate that coolant.  It goes through a series of tubes and hoses through the engine where it picks up heat, then is sent off to the radiator to get rid of that heat.  Cooled off, the coolant is recycled through the water pump to start the journey again.

The water pump works by taking mechanical power from the engine, usually from a belt.  Obviously, that belt has to be in good condition and adjusted properly or else the water pump won't be able to do its job.

Here are some things to look for that will signal problems with your water pump.  If your heat gauge is erratic or showing a much higher than normal temperature, that could be a sign of trouble.  Another is if you hear a whine under the hood.  And if that gets louder when you go faster, get it checked right away.  You may see steam coming out from under the hood or coolant may be leaking. 

These signs signal that it's time for you to have a technician check to see where the problem is. Some water pumps are powered by a timing belt.  If your vehicle has that design and your timing belt is due for replacement, sometimes it's a good idea to replace the water pump too, even if it's working properly.  That's because the labor to replace the timing belt can be expensive and it may be wise to proactively take care of the water pump while it's disassembled.

Your service advisor will explain the options available and offer the best path to keeping your water pump doing its job.  Your engine's life depends on it.

West Service Center
904 Cavalier Blvd
Chesapeake, Virginia 23323
757-487-4420
http://westservicecenter.com