Chesapeake Auto Repair

You know how heavy your engine and transmission are, so you can imagine how tough the parts that hold them onto your vehicle's sub-frame must be.  Not only must they support the weight, they also have to isolate vibrations and noise from the passenger cabin.  Pretty tall order, wouldn't you say?

The parts that face that task daily are called the motor mounts, or engine mounts.  They are usually made of rubber with steel brackets.  Others contain a liquid for vibration and sound isolation. 

Most vehicles have three or four motor mounts, and while rubber or hydraulic liquids do a good job of damping the vibrations from the engine, they also have their limitations.  The problem with rubber is that it gets old and brittle.  Plus, if there's an oil leak anywhere in your engine and oil gets on the rubber motor mounts, rubber will deteriorate even more quickly.  As for the liquid motor mounts, they can develop leaks and stop working. 

Here are signs a motor mount is going bad.  You may hear a loud clunking or banging sound under the hood.  That means the weight of the engine is shifting around enough to bang against other metal parts.  You may feel bad vibrations, and the engine may feel like it's moving around in a strange way.

When things get to that point, your vehicle can be damaged from that heavy engine knocking against things, and its time to replace one or more motor mounts.  Schedule a visit to your vehicle service facility. There, a technician will assess your motor mounts; if one bad one is found, it's not unusual that others are likely to fail soon and should be replaced before they do.

Because all vehicles are configured differently, some motor mounts are easily replaced.  But others can be much trickier, take a lot longer and therefore are more expensive to replace. 

It's important for your engine's health to make sure motor mounts are sound and solid.  You will maintain that quiet, vibration-free ride and could save your engine and transmission from major wear and tear.

West Service Center
904 Cavalier Blvd
Chesapeake, Virginia 23323
757-487-4420
http://westservicecenter.com

You know you have an accelerator pedal; step on it and your vehicle is supposed to go.  But did you know there is a part in your vehicle that keeps track of where the throttle is? It's called the Throttle Position Sensor, or TPS.

The TPS is a sensor that helps your vehicle figure out the right mix of air and fuel is reaching your engine.  It does that by keeping track of the throttle and sending that information to your vehicle's computer.  Other factors play a role in how well your engine is performing, including air temperature, how fast the engine is turning over and air flow. 

When the TPS isn't working right, you may find your vehicle won't accelerate or doesn't have the power you're expecting when you press on the accelerator.  In some cases, it may accelerate on its own.  Sometimes your vehicle won't go over a certain speed.  Your Check Engine light may go on.

Any of these symptoms should be checked out soon.  If your TPS stops working right, your vehicle may not be safe to drive.  Fortunately, most vehicles have a "limp home" mode that will allow you to get off a busy road to a safe spot. 

Your service advisor can let you know which TPS is the correct replacement for your vehicle.  Your shop may have to re-program the new TPS so it works correctly with other software in your vehicle.

It's a fact of life these days that computers control many of a vehicle's functions. The sensors that feed information to those computers help make your vehicle work the way it was engineered to and keep you motoring down the road safely and efficiently.

West Service Center
904 Cavalier Blvd
Chesapeake, Virginia 23323
757-487-4420
http://westservicecenter.com

It's pretty frustrating when your driver's window won't work.  You can't get your food at the drive-thru without opening the door, have a tough time using the ATM from your vehicle, can't have that fresh breeze blowing through your hair as you listen to your favorite road tunes.

Plus, there's a safety factor.  Your windows provide an escape route in case you need to get out and the doors won't work.  Let's take a look at what's going on when your window won't operate.

Most vehicles these days have power windows.  They have an electric motor in each power window and sometimes those fail.  They often give you a warning that they're on their last legs by making a noise or hesitating, so if you get a sign like that, have a technician check it out. Loss of power can also be due to a blown fuse, a bad switch or faulty wiring.

All windows have something called a regulator that moves the glass up and down.  They have a lot of moving parts in them which can break, become bent, rust or get out of alignment. The glass moves along a window track guide.  Sometimes if the glass gets out of the track, it won't move up and down the way it's designed to do.

When you take your vehicle over to a repair facility, a technician can pinpoint the cause of your malfunctioning window.  Often it involves having to remove the door panel to gain access to the components inside.  But when everything's working right, you'll be able to throw that annoying inconvenience right out the window.

West Service Center
904 Cavalier Blvd
Chesapeake, Virginia 23323
757-487-4420
http://westservicecenter.com

Know anyone who doesn't love a power seat in an SUV, a car, truck or van? They're convenient and precise in their adjustments.  But when they break, oh, what a pain.  Not only is it inconvenient, it may leave your seat position too close to the steering wheel or too far from the pedals.  This is a must-fix problem.

There are many things that cause a power seat to fail:

• Seat controls.  These are either at the side of the seat or in the door.  Both are places that can be exposed to moisture or other contaminants.  When the controls stop working, they usually need to be replaced.
• Seat motor.  Electric motors are what make a power seat move, and sometimes they fail.  Sometimes they just get worked to death and die of old age.  Replacement is the most common remedy.
• Fuses. A power seat is, after all, powered by electricity and all vehicle power systems have fuses to protect them.  A technician can determine which fuse may have blown and replace it.  But it's also important to figure out what caused the fuse to blow and deal with that, too.
• Wires.  There are wires under the seats that move when you move the seat.  Sometimes they get stretched, kinked or ripped.  In a power seat malfunction, it may be a wiring harness that needs to be replaced.
• Gears.  They help the seat move and may need to be realigned or replaced.
• Obstructions.  Yes, a piece of trash or a kid's toy has been known to jam up the works of a power seat. Taking them out of the mechanism may get your seat working again.

Most people pay extra to have power seats in a vehicle. So make sure you keep that convenient feature working. And don't forget that it's a safety issue, too.

West Service Center
904 Cavalier Blvd
Chesapeake, Virginia 23323
757-487-4420
http://westservicecenter.com