Chesapeake Auto Repair

It's safe to say that most drivers take their brakes for granted.  You press on the brake pedal and the vehicle slows down or stops.  It's easy to see why it is so important for your vehicle's brakes to be working correctly.  Brakes are an important safety feature of any vehicle.

When it comes to your brakes working correctly, maintaining them regularly will ensure that you will always be able to slow or stop your vehicle in any situation, whether on a sunny day on dry pavement or a bad weather day on slippery surfaces.  And that is why regular brake service is such a sound investment for all drivers. The combo of brakes" and "surprises" doesn't usually end well.

You might already know about some of the parts of your braking system.  Terms familiar to you might be pads, rotors, and calipers. In short, the calipers press the pads, which in turn contact the rotors.  The resulting friction slows your vehicle.  Another type of brake uses a drum and brake shoes.  But both count on friction to work.

When you come in to have us check your brakes, we'll make sure those parts are all in good working together and meet the specifications of your vehicle manufacturer.  But there are other important components as well.  Your brake system has several parts of a hydraulic system that uses fluids to conduct the pressure you put on the brake pedal to the brakes on all of your wheels.  There are hoses and lines that can sometimes degrade because of road salt or debris.  

Last and not least, your vehicle has an emergency or parking brake. It's something you'll need to prevent your vehicle from rolling when you park on a steep incline. Your parking brake also is an important backup if your hydraulic brakes fail.  

Give your brakes some tender loving care with regular service and they'll be there when you need them.

West Service Center
904 Cavalier Blvd
Chesapeake, Virginia 23323
757-487-4420
http://westservicecenter.com

We all want to breathe clean air and keep our planet green.  One of the ways to do that is by requiring all vehicles with internal combustion engines to pass an emissions test.  That’s because these vehicles can be big polluters.  

Everyone wants their car to pass the test so they can continue their day-to-day driving routine.  But then comes that one day when they tell you your vehicle has failed.  Why does that happen?

One of the most common reasons is that your gas cap is leaking or loose (or maybe you don’t even have one on your vehicle!).  The gas cap is supposed to seal in vapors, but sometimes its seals or gaskets dry out or crack. Replace it, and you’re good to go.

Another common reason your vehicle failed the test is that your catalytic converter isn’t doing its job. It is supposed to convert toxic gases from your engine into ones that don’t pollute the air.  There are many reasons the catalytic converter may not be working.  It may be physically damaged, or the steady flow of exhaust gases has fouled the converter. 

You may have a bad oxygen sensor. It’s supposed to measure how much oxygen is in your exhaust.  This can cause the air-fuel mixture to be too rich, resulting in too many hydrocarbons in the exhaust. Your ignition system may also have problems, such as worn-out spark plugs.  Dirty fuel injectors can contribute to excess emissions.

Believe it or not, a dirty engine air filter may be the culprit. If it hasn’t been replaced for a while, your vehicle may be emitting too many hydrocarbons -  something that will cause your vehicle to fail the emissions test.

You can usually avoid a failed emissions test by maintaining your vehicle regularly.  The best way to do that is by bringing it to our trained technicians, so your vehicle gets the service it needs, scheduled and non-scheduled.  Plus, you’ll be doing your part to keep our air clean.

West Service Center
904 Cavalier Blvd
Chesapeake, Virginia 23323
757-487-4420
http://westservicecenter.com

There’s an important part in your vehicle that shields your timing belt, timing chain or cam belt from the debris and gunk that can be kicked up from the road.  It’s called the timing cover.  It’s important because the timing belt or chain is what coordinates parts of your engine called the camshafts and crankshaft.  When they’re in sync, all runs smoothly.  When they’re not, it can cause some serious engine problems.

If your vehicle has a timing belt, without the protection of the timing cover, that belt can come loose from the timing gears or break.  If your vehicle has a timing chain, the cover keeps engine oil circulating around it which lubricates it.  When that starts to leak because of a bad gasket, the chain may not be getting adequate lubrication.  

If your vehicle has a timing cover problem, you may notice engine oil leaking if a gasket is not sealing tightly.  You may hear a strange metallic sound coming from the engine.  Another sign that timing is off is that you notice you’re losing power when you’re going up a hill. 

Usually, the timing cover will not wear out. But if you drive on roads where you’re getting a lot of debris and dirt kicked up into your engine compartment, the timing cover can get damaged and affect your vehicle’s operation.  It eventually could lead to engine problems, so if you notice any of the symptoms mentioned, have one of our technicians inspect your timing cover and gasket.  

West Service Center
904 Cavalier Blvd
Chesapeake, Virginia 23323
757-487-4420
http://westservicecenter.com

You may have heard about an important part of your vehicle's engine called a timing belt, and many know that if that belt breaks, it can cause some very serious engine problems.  

Not all vehicles have them, and the ones that do generally have smaller engines.  The timing belt keeps the engine synchronized so that every time a spark plug fires, the crankshaft, camshaft, pistons, and valves are all working together.  Timing belts will eventually have to be replaced, and most vehicle manufacturers recommend when that should be.  Typically, it's around every 60,000-100,000 miles, or 100,000-160,000 km. It's a good idea to stick to your vehicle's schedule or be alert for signs that the timing belt may be failing prematurely.

Some of those symptoms? Maybe your engine won't even turn over when you try firing it up. You might hear a ticking or banging sound under the hood.  Perhaps you spot an oil leak or notice the engine misfiring.  If any of those are happening to your vehicle, we strongly advise you to bring it in to us so we can have a technician see what's causing the issue. 

Again, if your timing belt breaks, it can cause serious, expensive engine damage to valves and pistons. It is far better to have the timing belt replaced before it breaks.

Replacing it is fairly involved, and other associated parts, such as the water pump, thermostat, tensioner, and idler pulleys may be replaced at the same time.  That way, your timing belt is more likely to last another 60,000-100,000 miles/100,000-160,000 km without any problems. 

Timing belts are being used in fewer vehicles, with more and more using timing chains since they last longer.  If you're wondering if your vehicle has one, contact our service adviser who can check. Maybe it's time to schedule a timing belt replacement to keep your vehicle's engine parts working in harmony as they should.

West Service Center
904 Cavalier Blvd
Chesapeake, Virginia 23323
757-487-4420
http://westservicecenter.com

For most drivers, at some point you’re going to have a flat tire. Depending on how it was damaged, it may have to be replaced.  But sometimes, a repair will do the trick, as long as the puncture isn’t on the sidewall and the hole is smaller than ¼ inch/6.35mm in diameter. Here are the three common ways your tire can be fixed.

One way is to put a plug in the hole.  Since most tires are damaged by running over sharp objects such as screws and nails, the small hole from which the air is escaping is on the part of the tire that touches the road. If it’s in the sidewall, it most likely can’t be fixed.  

In the plug method, a technician inserets a rubber plug.  It is covered with some sticky, gluey stuff, and is pushed into the hole from the outside. That plugs the hole and stays in place, thanks to the glue. Friction from driving heats it up and seals the deal.  

Another method is to patch the hole.  For this, your tire has to first be taken off the vehicle, then off the rim so the technician can get access to the inside. There, they’ll clean the inside surface around the hole and apply a rubber patch with an adhesive on it. This type of patch works well, and because of the extra steps and complexity, costs more than having your tire plugged.  

There’s also a combination of those methods just described, the plug-patch.  It is, in essence, a type of patch with glue on it that has a plug sticking out of it.  The plug is inserted into the tire from the inside and pulled through the hole from the outside, drawing the attached patch tight against the tire’s inside surface. The last two methods can’t be used if the hole is near another repair or the sidewall.    

The good news is if it’s fixed properly, your repaired tire should give you good service.

West Service Center
904 Cavalier Blvd
Chesapeake, Virginia 23323
757-487-4420
http://westservicecenter.com