Chesapeake Auto Repair

Automatic transmissions rule. The old days of shifting your own gears are a thing of the past for most drivers.  But automatic transmission trouble can be a big inconvenience for any driver if it comes at the wrong time in the wrong place.  Here are some signs to look out for that may mean you are having transmission issues.

When you are driving, your vehicle seems to slip in an out of gear without you touching anything.  That's what some call, not surprisingly, a "slipping transmission." 

When your vehicle shifts from one gear to the next, you hear a loud "clunk." Transmissions are supposed to be nearly silent when they shift, so that noise is telling you something is wrong. 

If you notice there's a puddle of some fluid under your vehicle, your transmission could be leaking fluid.  Try to figure out what color it is (try putting a piece of cardboard underneath to capture some of the fluid).  If it is red or brown, that's a sign it could be transmission fluid. Sometimes you may smell the transmission fluid, too; it has what some consider a "sweet" odor.

You may have a warning light that goes on when your transmission fluid is low (it could be a special transmission symbol or simply the Check Engine light).  That light could also mean the fluid is too hot or has low pressure.

If you shift your vehicle into D (for Drive) and it doesn't move or slowly engages after some delay, you may be seeing the start of a serious problem.

Of course, you don't want a malfunctioning transmission to strand you at some inopportune time. So if your vehicle is showing any of these signs, arrange a time for a technician to check it out.  Not only are broken transmissions an inconvenience, they can be a safety hazard, too. 

West Service Center
904 Cavalier Blvd
Chesapeake, Virginia 23323
757-487-4420
http://westservicecenter.com

The other day, a driver was trying to open his vehicle's hood so he could add some windshield washer fluid.  But when he pulled the hood release inside the car, nothing happened. 

Usually, opening any hood is a 2-step process.  You pull the hood release (which is usually a handle under the dashboard to the left of the steering column) and listen for the hood to pop up slightly. (It doesn't open all the way because it has a safety latch to prevent you from accidentally opening it up while you're driving.) Then, you get out and find the latch, usually through the grille near the hood.  There's a little handle on it which you push, slide or pull (there are a few different types) at which point the hood can be opened up all the way. 

But in this driver's case, the hood would not release at all when he pulled the handle inside.  Not knowing what to do, he called his service advisor, who told him to bring it over.  The reason? A hood with a broken latch could be a safety hazard since it is possible it's not securely closed. And in this condition, it's possible for the hood to suddenly release while you are driving, obscuring your view of the road. 

Latch issues can be caused by many things, perhaps a broken cable between the hood release and the latch.  It's possible that cable just detached or frayed after being opened so many times.  If a hood release cable isn't kept lubricated, it can corrode and just lock up.

In this driver's case, the cable had corroded and broken, so it had to be replaced.  Unfortunately, many times you won't know you have a problem with your hood latch until one time you pull it and it breaks without warning.  When your vehicle is in for routine maintenance like an oil change, a technician will often keep an eye out for signs that your hood latch needs attention so you don't get "locked" out of your engine compartment.

West Service Center
904 Cavalier Blvd
Chesapeake, Virginia 23323
757-487-4420
http://westservicecenter.com

If you keep up on technology trends, then you may be intrigued about synthetic motor oil.  It was introduced in the 1960s when Mobil came up with it.  Mobil's oil was different from conventional motor oil because it was first broken down to its basic molecules.  Then, Mobil removed additional impurities from crude oil and "tailored them to the demands of modern engines."

Synthetic oil is becoming more popular now because of its advantages over conventional oil. It's more resistant to sludge forming in an engine.  It is more efficient and protects engines better under temperature extremes.  Because it allows drivers to go longer between oil changes, many feel it's more convenient. 

The downside is that synthetic oil is more expensive, but because it doesn't need changing as often, the cost can be pretty comparable in the long run.

Those who drive high performance vehicles (think Audi, BMW, Mercedes) are already using synthetic oil if they're following their manufacturer's guidelines.  Other manufacturers recommend a synthetic blend.  So for those who are using conventional oil, you may want to consult your service advisor for some recommendations if you want to switch to synthetic. 

If you're the type who always waits until the last-minute or doesn't ever get in quite in time for the recommended oil change interval, the longer gap required between changes with synthetic oil may appeal to you.  In some cases, you can go up to 15,000 miles/24,000 km between changes. 

If you drive in a very cold climate, synthetic oil can flow more easily at startup and may offer quicker engine protection.  On the other hand, in hot climates, synthetic oil can resist heat breakdown better.

Or you may be one of those drivers who have been getting along fine with conventional oil changes.  Millions do.  Just remember that changing your oil is considered the most important maintenance you can do on your vehicle, so make sure it's done at the right time and with the oil that best suits your driving needs.

West Service Center
904 Cavalier Blvd
Chesapeake, Virginia 23323
757-487-4420
http://westservicecenter.com

If your vehicle makes a grinding sound when you turn the steering wheel, it's speaking to you.  No, really, it is.  So listen to what it's saying and you could avoid a much more costly repair down the road.

A grinding sound coming from the front of your vehicle when you are turning can offer some very informative clues as to what's going on.  One cause could be that there's a problem with the mechanical linkage that enables you to turn the wheels.  Another is that the hydraulic system that makes turning the steering wheel easier may have its own problems. 

Think of it.  Hydraulic power steering has many components that need to work in tandem.  The power steering fluid may be too old and contaminated.  Or its level may be low. That may be caused by a leak somewhere in the system. A technician can check things over to find out exactly what's happening.

Other causes of grinding while turning can be problems with the suspension in the front.  You may have a failing CV (constant velocity) joint.  It could be your brakes are partially engaging while you are turning.  That metal-on-metal sound is never a sign that things are working just the way they're supposed to.

To a technician looking to pinpoint the problem with your vehicle, it's not a daily grind at all.  Experience and training will help her or him zero in on what's causing the noise and get you back on the road. Maybe you can enjoy your sound system more after that distracting background noise has disappeared!

West Service Center
904 Cavalier Blvd
Chesapeake, Virginia 23323
757-487-4420
http://westservicecenter.com