Monthly Archives: November 2019

H20 No! (Driving Through Standing Water)

In a year marked by unusually heavy flooding in North America, drivers are very aware of the possibility they may find themselves driving where water has come over the road.  It can be a daunting and frightening situation.  Flooding waters can move quickly and unpredictably, so you have to keep your wits about you when you encounter that situation.

Here a sample of one vehicle manufacturer's guidelines on what to do.  First, the vehicle is designed to go through some water, but you must be careful.  Never attempt to drive through water deeper than the bottom of your tires.

You can get out of your vehicle to check the depth of the water, but you can never be sure that you aren't going to drive into a spot where the road has washed away.  You can't see below the surface of the water, and suddenly you could find yourself in a place where the road drops off unexpectedly.  In swift moving storm runoff, your vehicle could literally be floating away with the current, putting your life and those of your passengers in mortal danger. 

Never go more than 5mph/8 km/hr when you drive through standing water.  That minimizes the waves you create.  If you DO find yourself in water that is touching your drivetrain components, that water can damage them.  And if you get water in your engine, it can lock up in seconds and stall.  The potential damage can be catastrophic.

You may have found yourself driving in water deep enough to reach your drivetrain components, and it's essential that you have a technician check the fluids to make sure they haven't been contaminated.  That includes engine oil, transmission and axle.  Driving with fluids contaminated with water can severely damage those components. 

The bottom line is to avoid driving through water at all if you possibly can.  Check your vehicle's owner's manual to see if there are specific guidelines for driving YOUR vehicle in standing water.  It's information that could save your life.

West Service Center
904 Cavalier Blvd
Chesapeake, Virginia 23323
757-487-4420
http://westservicecenter.com

Wash Me, Wash Me Right (How to Wash a Vehicle)

Most would agree they'd rather drive around in a clean, shiny vehicle than one coated with a layer of dirt.  When warmer weather comes around, some of us are bound and determined to wash our own vehicles.  And to protect the paint and its luster, there are a few things to keep in mind when you get out the bucket and soap.

  • Cool body.  It's not a good idea to wash a vehicle when the body is hot.  If it's been sitting out in the sun or you've been riding around on a sunny day, make sure you cool your vehicle off by either moving it to the shade or wetting it down with cool water. The problem with washing a hot vehicle is that it's going to dry so fast, minerals in the water can form hard-to-remove spots on the paint.  And some of those can be really difficult to get out.  Best to avoid it.
  • Slippery when wet.  Make sure you wet your vehicle down thoroughly before you get the washing mitt out.  Experts keep a couple of buckets of soapy water on hand, and they use soap especially engineered to remove dirt from a vehicle without stripping off the wax that might be on it. 
  • The washing mitt.  Experts say to use a mitt with hundreds of moisture-absorbing strands on it.  Start washing at the top and move down.  If you keep dipping the mitt in the buckets frequently, a minimal amount of dirt will stick to it and that will prevent scratching the paint. 
  • Wheels last.  Wait until you've finished washing the body before washing the wheels.  Some detailers prefer special wheel-washing tools or brushes. 
  • Rinse it well.  Hose the vehicle off thoroughly to get all the soap off, then dry immediately.  Some people swear by a chamois, others like cloth better.  Cotton or microfiber towels will do.  

The next time you have your vehicle in for maintenance, you might ask your service advisor for recommendations on vehicle washing accessories.  They are usually up on the brands that produce the best results.  You may not be a detailing pro, but there's no reason your vehicle can't look like you are.

West Service Center
904 Cavalier Blvd
Chesapeake, Virginia 23323
757-487-4420
http://westservicecenter.com

Unlock the Secret (Malfunctioning Door Lock Actuator)

What a convenience power door locks are on a vehicle.  The latest don't even require you to push the button on the key fob; all you have to do is have it with you.  But sometimes there's a component of power door locks that can fail, especially when they are used several times each day.  Those are called the door lock actuators.

The actuator is an electric part that works with others (like motors and gears) to lock and unlock doors.  You can hear them work, sometimes with the little whirr of the gear or the quiet clunk of the lock finishing its cycle.  And it's good to pay attention to that sound because if it starts to sound different, it could be a signal that your lock is on the brink of failing. Another sign of a failing power door lock actuator is they start working intermittently or quickly and erratically.  The driver's door is often the first to start acting up since it's the one that usually gets the most use.

When you start to notice these signs, consider a visit to your service facility to get your vehicle checked out.  If you wait too long, you may find yourself getting locked out of your vehicle. Many vehicles do have mechanical keys available as a failsafe so you are at least able to get inside.  Some of them are hidden inside the key fob and you should know how to access them.  Check with your owner's manual or ask your service advisor.

It's extremely inconvenient to have to unlock your vehicle with the mechanical key, then get inside and unlock the other doors. It's even more inconvenient if you have passengers in the rear seats.  And that doesn't even count having to go through the same thing to lock the doors when you arrive at your destination.

There are many things that can cause power door locks to malfunction, but if it turns out to be a power lock actuator, the most common remedy is to replace it.  Some are easier for technicians to reach than others, depending on your vehicle's design.  But once your locks are working again, you might think you've found the "key" to happiness!

West Service Center
904 Cavalier Blvd
Chesapeake, Virginia 23323
757-487-4420
http://westservicecenter.com

Categories:

Auto Safety

Not a Good Vibe (Driveshaft Failure)

When you feel your vehicle vibrating as you're driving down the road, one cause could be something you may not have ever seen: your driveshaft.  It is underneath the vehicle and most drivers don't climb under there to take a look very often.  The driveshaft is a cylindrical part that helps conduct the rotational power from your engine to your drive wheels.  If you have a four-wheel drive vehicle, you may have two driveshafts. 

The drive shaft has bushings, and when they wear out, that's a likely source of the vibrations.  When the bushings are in good condition, they prevent the driveshaft from vibrating.  And if you don't get your vehicle repaired fairly soon after discovering vibrations, they'll continue to get worse and cause other components of the drivetrain to wear out.

The driveshaft is, of course, only one part of the drivetrain.  It includes other parts such as axles, transmission, differentials and joints.  They all work together and need to be maintained properly.  When a driveshaft fails, there can be symptoms other than vibrations.  They include difficulty turning, rattles, clunks and squeaks coming from underneath your vehicle. You may even feel a shudder when you accelerate from a stop.

Driveshafts can fail when they get corroded or damaged by rough roads, curbs and debris. A trained technician with experience working on drivetrains uses specialized equipment that doesn't further damage the drivetrain's other parts.  Sometimes the entire driveshaft will have to be replaced; sometimes the problems can be fixed by replacing individual components. 

Your vehicle's drivetrain was engineered to propel you smoothly down the road.  When time and distance begin to take their toll, have your vehicle looked at by your service facility. They'll know how to properly pinpoint what's causing your problems and restore your vehicle to the reliable, smooth, safe machine its designers worked hard to create.

West Service Center
904 Cavalier Blvd
Chesapeake, Virginia 23323
757-487-4420
http://westservicecenter.com

Categories:

Drive Train
904 Cavalier Blvd Chesapeake, VA, 23323 (757) 487-4420
West Service Center is committed to ensuring effective communication and digital accessibility to all users. We are continually improving the user experience for everyone, and apply the relevant accessibility standards to achieve these goals. We welcome your feedback. Please call West Service Center (757) 487-4420 if you have any issues in accessing any area of our website.